040 pre-painted aluminum with galvanized posts located on 16” centers. Solid bucked rivets on overlapping joints with structural bonding intermediate posts. Interior full height 3/8” plywood lining and recessed cargo tie down rings are standard.
Note: FRP bodies use 3/8” fiberglass reinforced sidewalls.
Rear Frame
E-coated steel rear structure with 12 gauge sides and header and 10 gauge threshold with drain holes, wrapped in white vinyl. Two rear grab handles.
Rear Door
Full width composite roll up with magnicoated fasteners and upgraded exterior coating.
Roof Assembly
Seamless aluminum sheet with anti-snag interior roof bows located on 24” centers.
Lighting
All FMVSS required LED lighting. LED cargo dome light with 3-way switches located at rear of body and in the cab with cab indicator light. Rear brake and backup lights recessed into the vertical rear structure.
Subframe and Floor
Box tube long sills with 3” formed C-channel cross members 16” on center. 1-1/8” laminated hardwood flat floor without gas filler intrusionRear Bumper
Full width pooched step bumper for better traction.
Front End Assembly
Aerodynamic design with aluminum 12” top radius and extruded aluminum 5” vertical posts. Impact resistant top corners.
Interior Floor Length
Even with the standard set back bulkhead for increased driver comfort, the cargo length at the floor is true to the stated length of the body. A sliding bulkhead door is standard as well.
E-coated steel rear structure with dual integrated roof access ladders on dual and single rear wheel applications.
Rear Door
Unique 70/30 rear swing door with 49.5” clear opening width.
Roof Assembly
One-piece translucent material with galvanized roof bows located 12” on center. Dual rear wheel applications include roof ladder racks that are available as optional equipment on single rear wheel models.
Lighting
All FMVSS required LED lighting. LED cargo dome light with 3-way switches located at rear of body and in the cab with cab indicator light.
Frame and Door
Formed steel cross members with rubberized non-slip top surface over plywood.
Rear Bumper
E-coated steel step surface.
Front End Assembly
Aerodynamic aluminum radius top and sides with impact resistant top corners.
Interior Floor Length
Even with the standard set back bulkhead for increased driver comfort, the cargo length at the floor is true to the stated length of the body. A sliding bulkhead door is standard as well.
Shelving
Each vertical compartment has one adjustable shelf standard to allow flexibility for specific needs. Note: additional shelving options available.
Workport Package #1
Electric Master Lock System w/ Two (2) Remote Key Fobs
Interior Access Doors
Workport Package #2
Electric Master Lock System w/ Two (2) Remote Key Fobs
Interior Access Doors
Rocktop Air Faring w/ Full Height Access Door or 36" Cabover
Four (4) 18" Deep Interior Adjustable Shelves (DRW) or Two (2) 12" Deep Interior Adjustable Shelves (SRW)
Aluminum Catwalk Centered on Ladder Racks (12" Long)
Workport Package #3
Electric Master Lock System w/ Two (2) Remote Key Fobs
Interior Access Doors
Rocktop Air Faring w/ Full Height Access Door or 36" Cabover
Four (4) 18" Deep Interior Adjustable Shelves (DRW) or Two (2) 12" Deep Interior Adjustable Shelves (SRW)
Aluminum Catwalk Centered on Ladder Racks (12" Long)
3/8” FRP (Fiberglass Reinforced Plywood) one-piece sidewalls extended below floor line as an integrated body skirting.
Rear Frame
E-coated steel rear structure wrapped in white vinyl with 2 rear grab handles.
Rear Door
Full width composite roll up with magnicoated fasteners and upgraded exterior coating.
Roof Assembly
One-piece translucent material with galvanized roof bows located 24” on center.
Lighting
All FMVSS required LED lighting. LED cargo dome light with 3-way switches located at rear of body and in the cab with cab indicator light.
Frame and Floor
3-1/2” formed steel cross members and 1-1/8” tongue and groove plywood with E-coated steel wheel wells.
Rear Bumper
E-coated steel step surface.
Front End Assembly
Aerodynamic aluminum radius top and sides with impact resistant top corners.
Interior Floor Length
Even with the standard set back bulkhead for increased driver comfort, the cargo length at the floor is true to the stated length of the body. A sliding bulkhead door is standard as well.
Popular Options
Hardwood Floor
"Rock Top" Air Faring with Full Height Access Door
3/8” FRP (Fiberglass Reinforced Plywood) one-piece sidewalls extended below floor line as an integrated body skirting.
Rear Frame
E-coated steel rear structure wrapped in white vinyl with 2 rear grab handles.
Rear Door
Composite roll up rear door with two point side latches. Clear opening 50” wide and 81.5” high.
Roof Assembly
One-piece translucent material with galvanized roof bows located 24” on center.
Lighting
All FMVSS required LED lighting. LED cargo dome light with 3-way switches located at rear of body and in the cab with cab indicator light.
Frame and Floor
3-1/2” formed cross members on 24” center and 1-1/8” tongue and groove plywood overlaid with rubberized non-slip top surface.
Rear Bumper
Aluminum grip strut step surface for maximum safety and low maintenance.
Front End Assembly
“Rocktop” air fairing with full height access door standard.
Interior Floor Length
Even with the standard set back bulkhead for increased driver comfort, the cargo length at the floor is true to the stated length of the body. A sliding bulkhead door is standard as well.
Multiple door configurations provide maximum versatility
Interior fold-up or fixed shelving
E-track, cargo load bars, work counters, bins, and compartments
Lightweight aluminum construction
Durable, rust-free body with increased payload capacity
Components are heavy-duty and tested superior
Low step-in height at the cab doors and rear door
Full stand-up height in the cab and cargo areas for ergonomic workspace
Windshield provides superior visibility
Over 35 years of proven solutions to the largest bakeries
Standard
Twin 20" Swing rear door
Vinyl driver's seat
12V receptacle in dash
4x10 driver quarter panel vent
.32 aluminum exterior roof
24" spacing bows
Extruded aluminum cargo floor
Fuel sending unit access
48" sidewall stud spacing
8" treadplate on rear bumper
Black painted exterior mirrors
Optional
Safety tread in stepwell
Cigarette lighter and ashtray
Cupholder
Large RH Worktable
4x10 passenger quarter panel vent
Insulated cab floor mat
Ribbed cab floor mat
AM/FM radio w/ weather
CD player w/weather
HVAC cab air conditioner
15,000 to 50,000 BTU auxiliary cargo heater
Back up camera and/or alarm
.040 aluminum exterior roof
8" spacing bows
24" skylight in center of cargo
Additional cab dome light (1)
LED interior lights
18" 12V fluorescent lights
Full tread plate cargo floor
Sidewall liner
Polystrene insulation
Rear bumper treadplate/gripstrut 9 to 12"
Mud flaps
Optional
Twin 25"
Twin 29"
Two Full Swing
Bi-Fold
Single 40"
Full width roll up
72" roll up
60" roll up
50" roll up
QUICK CONTACT
Get your exclusive internet pricing today! Fill out the form to the right and a South Bay Ford representative will get back to you as soon as possible with your quote.